PSE is back with a bow that is a direct response to their customers‚Äô specific request for a smoother draw cycle on the popular DNA. They created a whole new cam as a result and have added ‚ÄúSP‚ÄĚ to the name, which stands for ‚ÄúSmoother Pull.‚ÄĚ This all-out effort for their customers speaks volumes about the company‚Äôs focus and commitment.
The DNA SP is home to the source of PSE‚Äôs revamped draw cycle‚ÄĒthe Source Hybrid Cam. Along with that comes a host of other technologies, including the Flex Cable Slide, 4th Generation X-Technology limbs, Centerlock 2 limb pockets, detachable Limb Bands, fully machined forged reflex riser, B.E.S.T. RAPTOR grip, new BackStop2 string silencer and America‚Äôs Best string/cables.
Smoother is Better
PSE heard the voice of its loyal customers when they asked for the performance and features of the DNA with a smoother draw cycle. The company took the draw cycle of the popular Evo Cam and designed it to work with center pull geometry‚ÄĒthe result is PSE‚Äôs Source Hybrid Cam. This cam still produces IBO speeds reaching 345 fps on a 6-inch brace height and 75 percent system letoff. Along with all the typical cam features, PSE also offers an optional limb stop for the Source Cam.
An Inner Cam system offers draw lengths from 24‚ÄČ1‚ĀĄ2-30 inches, in half-inch increments. A pin protruding from the Inner Cam is positively positioned into one of the available holes on the main body of the cam. All positions and designations are clearly marked.
So, what is the bottom line with this cam? Well, it gives you a smoother draw than the Core Cam while still smoking arrows down range at at blistering speeds.
Providing both physical and complementary support to the new Source Cam are PSE‚Äôs 4th Generation X-Technology Limbs. Like other X-Technology limbs, they are heavily pre-loaded and sport an extreme curl/bend that brings these split limbs to a past-parallel position before they are ever drawn.
At full draw, they dip even further for a radical look. Limbs are engineered to provide optimal stress levels for each individual limb spine. The fiberglass limbs are made through a proprietary process and are sorted into consistent sets based on spine value. Limb sets are available in 50, 60, 65 and 70 pounds of peak draw weight.
The PSE Centerlock2 limb pocket is significantly lighter than the original version while maintaining the same level of centerline control. The aluminum, closed-end pocket pivots during the draw weight adjustment process for superior control and alignment.
This all means that the engineering provides no-hassle durability through stress mapping the limbs; the past parallel position reduces shock noise and vibration while the pockets keep everything in line for consistency and accuracy.
Feature Packed Forging
The riser is designed to position the limbs, cams, cables and string in such a position as to precisely center the arrow in the structure of the bow. This is called Center Pull technology and was developed to optimize tunability potential and overall performance. Also incorporated into the riser are tuning marks engraved into the shelf area, which provide a good starting point for your tuning efforts without the need for lasers, levels, etc.
PSE‚Äôs adjustable Flex Cable Slide system is essentially a mini X-Technology limb manufactured with a friction-reducing material that allows the cable slide to operate freely and quietly. The rod flexes toward the centerline of the bow during the draw cycle, which reduces lateral load by up to 30 percent. In turn, it minimizes torque at full draw.
Rounding out the package on the DNA SP riser is the B.E.S.T. Raptor Grip, a stainless steel stabilizer-mounting insert, multiple sight mounting positions and the micro-adjustable BackStop2 with polymer bumper.
The bottom line for a bowhunter? This riser is designed to help you find the ultimate tune quickly and without a ton of equipment. The Flex Cable Slide reduces torque, which equals more forgiveness, consistency and accuracy. The riser is lightweight and has other features that eliminate hassle, keep noise to a minimum and offer sighting adjustability.
While the DNA SP is not as quick as the original, it is still faster than most competing rigs, and there is a big upside to be found in the smoother draw cycle. A short valley means no creep, which makes shooting a proper draw length important. A small ‚Äúbump‚ÄĚ and mild vibration at the shot were easily tamed with a quality stabilizer, while noise was minimal. This will undoubtedly be a very popular bow for PSE.
Manufacturer: PSE, 520-884-9065
Model: DNA SP
Cam System: Source Hybrid Cam
Weight: 3.8 pounds (advertised); 3.75 pounds (as tested)
Brace Height: 6 inches
Axle-To-Axle length: 31‚ÄČ1‚ĀĄ4 inches
Draw Weights: 50, 60, 65 and 70 pounds peak
Draw Lengths: 24‚ÄČ1‚ĀĄ2-30 inches, in half-inch increments
Riser: Planar Flex, Forged and fully CNC machined
Limbs: 4th Generation X Technology, Split
String: America‚Äôs Best, 58‚ÄČ5‚ĀĄ8 inches
Cables: America‚Äôs Best, 32‚ÄČ1‚ĀĄ4 and 34 inches
Grip: B.E.S.T. RAPTOR
Finish: Mossy Oak Break-Up Infinity, PSE Skullworks, Black
Advertised IBO Speed: 337-345 fps
Suggested Retail Price: $899.99
Comments: A well-balanced hunting partner.
What you may not know is that the same company with this impressive string of top-end stars also offers one of the best ‚Äúbang for your buck‚ÄĚ bows on the market‚ÄĒthe Charger. Check out the full review.
The company‚Äôs new Motive 6 bow is all about the hunt. The Motive 6 is loaded with many features, including the powerful H13 Synchronized Hybrid cams, Max Pre-Load Quad limbs, Dual Offset String Suppressors, 4√ó4 Roller Guard and Bear Logo Overmold grip. Check out the full review.
The Hoyt Vector 32 features the popular TEC LITE riser design with the new Perfect Balance Stabilization System, RKT Cam & 1‚ĀĄ2, XTS PRO ARC limbs, Pro-Lock X-Lite limb pockets, 180 Pro Fit grip, In-Line Roller Guard and more. Check out the full review.
Mathews is focused on the enjoyment and overall experience an archer is afforded when shooting one of its bows. The flagship Creed was created with a synergistic approach, meaning they brought together all of the top technologies from previous models into mechanical and aesthetic harmony. The Creed is outfitted with the SimPlex Solocam, split parallel limbs, super lightweight GeoGrid Lock riser, and much more. Check out the full review.
For 2013, BowTech introduces the aptly named Experience, a bow designed to maximize the archer‚Äôs overall shooting experience, with a strong focus on accuracy. This rig features the new CarbonCore Limbs and Extinguish Dampening System, along with a host of proven technologies such as the OverDrive Binary Cam System, Center Pivot Extreme Riser, Two-Piece Wood Grip, FLX Guard Cable-Containment System and Octane factory string and cables. Check out the full review.
The 2012 Heli-m, like all Mathews bows, is home to an array of technologies and features. It all starts with a super lightweight GeoGrid Lock riser, which is home to the Reverse Assist Roller Guard, Harmonic Stabilizer Lite, Dead End String Stop Lite and the Rich Walnut SlimFit Inline grip. Also featured on the new rig are the company's SphereLock Pivoting Limb Cup System with Limb Turret, SE5 Composite Limb System and the Heli-m Cam. Check out the full review.