Since its beginning as Grace Engineering in 1968, this three-generation family business has always been about innovation, quality and service. The ‚ÄúG‚ÄĚ in the G5 name represents the family name, while the 5 is the number of Lou Grace‚Äôs children. Lou and two of his five children, Matt and Nate, run the business today, which includes the Prime line of bows.
Prime‚Äôs 2014 Alloy features patent-pending Parallel Cam Technology, extra-wide Gordon Glass limbs, a newly designed reflex riser and the Ultra Fit grip.
Additionally, this rig was outfitted with a specially designed Flexing Roller cable guard, a string stop and two Bowjax limb dampeners to reduce shock and vibration.
The Alloy‚Äôs PCX Parallel Cam system spreads the base of the dual lobes out further than previous versions for an increase in lateral stabilization. This is designed to drastically reduce cam lean.
Rather than pull from the center of a single lobe cam, the PCX uses a split yoke at the end of the bowstring to apply the load to the outside surfaces of the dual-lobe Parallel cams.
Think of the difference in your own stability if you stand with your feet together versus a wide stance! In essence, the PCX has its feet spread wide.
Each of the two cables used in this system are anchored to both cams in line with their center. This keeps the load from the cables centered while forcing the cams to work in lock step. This greatly reduces any problems with cam timing and allows the system to self-adjust over time.
Draw lengths are available from 26-30 inches, in half-inch increments. Another feature is an adjustable draw stop, which offers a wide range of letoff percentages for a custom feel.
On the Riser
Prime‚Äôs newly designed reflex riser is constructed using 7000 series aluminum, which is alloyed with Zinc and extremely strong. The riser is finished with the company‚Äôs patented Durafuse process. Sublimation, rather than film dipping or painting, is and it is said to exactly transfer the pattern with no stretching or pattern degradation, while added durability resists wear.
Another riser-based feature is the Ultra Fit grip. It is molded from a semi-soft rubber material that contains a combination of contours, size and shape for a comfortable experience. The handle under the molded grip has been machined with smooth transitions so that the user may remove the molded rubber grip for a narrower fit.
The Flexing Roller Cable Guard was designed for the Alloy and aids in the fight against cam lean. The rollers create an effortless interface for the cables as they move during the draw cycle and shot. Available adjustments allow the user to customize the distance cables are positioned from the fletching to avoid contact as the arrow leaves the bow.
Calm and Quiet
As bowhunters, we work hard to remain undetected in the field by fooling our prey‚Äôs eyes, ears and nose. Prime outfits the Alloy with several features to make this rig our advocate. First, Prime situates the extra-wide Gordon Glass limbs at an angle that results in a past-parallel position at full draw.
The shock-, vibration- and noise-reducing power of parallel and past-parallel limbs is well known in the industry and is expected on most top-end rigs. Furthermore, Prime seeks to tame the shot with a pair of BowJax limb dampeners and an adjustable string stop mounted to the riser below the grip.
The Prime Alloy is truly a pleasure to shoot thanks to a super smooth draw and minimal negative feedback at the shot. Slight hand shock and low-level vibration were almost completely knocked out with a quality stabilizer. The grip is comfortable but forced my hand a little higher into the shelf area than I like.
At just over four pounds, the Alloy‚Äôs weight is in line for a 33-inch rig, and all of the noise-reduction features pay off with a notably quiet shot.
Manufacturer: Prime by G5
Cam System: Parallel Cam PCX
Weight: 4.2 pounds (advertised); 4.15 pounds (as tested)
Brace Height: 6‚ÄČ3‚ĀĄ4 inches
Axle-To-Axle length: 33‚ÄČ1‚ĀĄ4 inches
Letoff: 75 percent
Draw Weights: 50, 60 and 70 pounds peak
Draw Lengths: 26-30 inches, in half-inch increments; cam specific
Riser: Forged and machined 7000 Series Aluminum, Reflex
Limbs: Extra Wide, Gordon Glass
String: 8190 BCY, 26 inches plus 33.79-inch yoke
Cables: 8190 BCY, 39.41 inches
Grip: Ultra Fit
Finish: Black, Optifade Open, Optifade Forest, Realtree Xtra
Advertised IBO Speed: 335 fps
Suggested Retail Price: $949-$999
Comments: A pleasure to shoot.
What you may not know is that the same company with this impressive string of top-end stars also offers one of the best ‚Äúbang for your buck‚ÄĚ bows on the market‚ÄĒthe Charger. Check out the full review.
The company‚Äôs new Motive 6 bow is all about the hunt. The Motive 6 is loaded with many features, including the powerful H13 Synchronized Hybrid cams, Max Pre-Load Quad limbs, Dual Offset String Suppressors, 4√ó4 Roller Guard and Bear Logo Overmold grip. Check out the full review.
The Hoyt Vector 32 features the popular TEC LITE riser design with the new Perfect Balance Stabilization System, RKT Cam & 1‚ĀĄ2, XTS PRO ARC limbs, Pro-Lock X-Lite limb pockets, 180 Pro Fit grip, In-Line Roller Guard and more. Check out the full review.
Mathews is focused on the enjoyment and overall experience an archer is afforded when shooting one of its bows. The flagship Creed was created with a synergistic approach, meaning they brought together all of the top technologies from previous models into mechanical and aesthetic harmony. The Creed is outfitted with the SimPlex Solocam, split parallel limbs, super lightweight GeoGrid Lock riser, and much more. Check out the full review.
For 2013, BowTech introduces the aptly named Experience, a bow designed to maximize the archer‚Äôs overall shooting experience, with a strong focus on accuracy. This rig features the new CarbonCore Limbs and Extinguish Dampening System, along with a host of proven technologies such as the OverDrive Binary Cam System, Center Pivot Extreme Riser, Two-Piece Wood Grip, FLX Guard Cable-Containment System and Octane factory string and cables. Check out the full review.
The 2012 Heli-m, like all Mathews bows, is home to an array of technologies and features. It all starts with a super lightweight GeoGrid Lock riser, which is home to the Reverse Assist Roller Guard, Harmonic Stabilizer Lite, Dead End String Stop Lite and the Rich Walnut SlimFit Inline grip. Also featured on the new rig are the company's SphereLock Pivoting Limb Cup System with Limb Turret, SE5 Composite Limb System and the Heli-m Cam. Check out the full review.