Fred Bear Outdoors SQ32 Bow

Fred Bear Outdoors SQ32 Bow

Two of three photos on my office walls depict Fred Bear. Although I never had the opportunity to meet Papa Bear myself, I still consider him one of my heroes and hold a special place in my heart for equipment that bears his name.

THE UPSHOT

Craftsmanship: 4 1/2 Stars; Precision machined, good looks

Grip Ergonomics: 4 Stars; A little larger than would have preferred

Finish: 4 1/2 Stars; Film-dipped Realtree Hardwoods Green HD

Draw Cycle: 4 1/2 Stars; Peaks early in the draw cycle


Recoil: 4 Stars; Slight recoil, vibration is average


Shot Noise: 4 1/2 Stars; Minimal

 

Two of three photos on my office walls depict Fred Bear. Although I never had the opportunity to meet Papa Bear myself, I still consider him one of my heroes and hold a special place in my heart for equipment that bears his name.

Fred became an archery legend by pushing the limits both of technology and through his feats afield. Fred Bear products were always no nonsense, hard-core, bowhunting gear directed at the average man or woman for a price they could afford and with the quality that hunters demand.


The company Fred created has gone through some rocky years in the recent past, but like a professional sports team, sometimes it requires tearing down and rebuilding from the ground up. Fred Bear Outdoors has gone through such tough times and has emerged proudly with the new Fred Bear SQ32.


APPEARANCE

The SQ32 is a parallel limb design and the Quad limbs attach to a long, sleek looking riser, which is film dipped in Realtree High Definition camo. When I review bows the grip is the first thing that pops out at me, but to be honest, the SQ32 with the Realtree camo and dark, hunter green eccentrics and limbs pockets screams out for an attention getting -- WOW!

Those who choose bowhunting have to worry about being heard. The synchronized cam system is plenty quiet, but to complete the package Fred Bear has thoughtfully provided a factory installed Sims LimbSavers and String Leeches to reduce vibration and noise.

SYNCHRONIZED

The SQ32 derives its' name from two main features. I'm sure that you guessed the 32.5-inch axle-to-axle length as the last part of the name hints at. The SQ refers to the parallel limb design offering short, straight, compression-molded quad limbs that are synchronized together and are in part responsible for the SQ32's 310 fps IBO speed rating.

Fred Bear now offers a revolutionary new cam-and-a-half system, the S1.5 Synchronized Hybrid Cam System. However, unlike the rest of the industry, the SQ32 matched cam-and-a-half system is synchronized for maximum accuracy and performance. The S1.5 Synchronized Hybrid Cam System features a full five inches of draw length adjustment and can be adjusted by few quick turns of the Allen screw in the module. The SQ32's letoff can be adjusted the same way to 65- or 75-percent.

SPECIFICATIONS

Manufacturer: Fred Bear Outdoors, Dept. PB, 817 Maxwell Avenue, Evansville, IN 47711; (866) 556-2754; www.fredbearoutdoors.com.

Model: SQ32

Draw Weights: 60 or 70 pounds peak

Draw Lengths: 26 to 30 inches

Riser: 22.5-inch, machined aluminum

Limbs: Straight Compression Molded Quad

Mass Weight: 4.1 pounds

Letoff: 65- or 75-percent, adjustable

Grip: Two-piece wood with 15/16 inch wide throat

Brace Height: 7.5 inches

Axle-To-Axle Length: 32.5 inches

Finish: Realtree Hardwoods Green HD

Advertised IBO Speed: 310 fps

Suggested Retail Price: $599

Comments: The SQ32's 7.5-inch brace height and hybrid cam system provides plenty of forgiveness for the 32.5-inch bow.

 

THE BOW

Even with the short length of the SQ32 the design still incorporates a long riser/short, parallel limb design. This maximizes the power delivered from the limbs and effectively reduces/cancels recoil and vibration as the two limbs move in opposite directions.

The grip on the SQ32 is a little meatier than I would prefer and measures about an inch at the throat, but widens toward the bottom of the grip. The wood side plates provide an accuracy-inducing square shaped grip that makes it easy to position your hand in the same spot shot after shot. The back of the riser, between the wood side plates, comes covered with a piece of leather to be appreciated when shooting on a hot summery day or frosty fall morning.

Fred Bear seems rather quiet about the limb pockets, but a quick visual shows that they are definitely onto something there. The Quad Limbs have a block fitted between them for spacing. There is also plastic "gaskets" on all sides of the limb where it fits into the pocket. I'm sure that this is to ensure that the limb fits perfectly into the pocket to promote stability and accuracy. The reason being, the straighter the limb is to the pocket, the truer the line, the limb/string/arrow all travel.

CONCLUSION

At the range the bow shot even better than I had originally guessed. The cams rolled over to a shallow valley and solid wall. The 7.5-inch brace height was more than sufficient to hook up a drop away rest that was cable operated by a tether tied through the cable. Vibration and noise were minimal, but noticeably reduced with an active stabilizer attached.

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

See More Recommendations

Popular Videos

Bill Winke

Bill Winke's Top Five Bow Shooting Tips

Petersen's Bowhunting Field Editor Bill Winke give us his top five bow shooting tips

CenterPoint CP400 Crossbow – First Look

CenterPoint CP400 Crossbow – First Look

CenterPoint Archery evolves in design and performance with the introduction of the new CP400 Crossbow.

Center Shots: How to Improve Your Bow Tuning

Center Shots: How to Improve Your Bow Tuning

Field editor Bill Winke goes over steps you can take to improve the tuning on your bow.

Trending Articles

Check out our list of the best new hunting arrows from the 2019 ATA Show! ATA Show

Top New Arrows for 2019

Tony J. Peterson - January 10, 2019

Check out our list of the best new hunting arrows from the 2019 ATA Show!

We Rank 16 Top Models on Sharpness, Accuracy, Penetration & More


It's that time of year when Arrows & Broadheads

2017 Fixed-Blade Broadhead Test

Jon E. Silks - December 12, 2017

We Rank 16 Top Models on Sharpness, Accuracy, Penetration & More It's that time of year...

Check out our picks for the best new bow sights from the 2019 ATA Show! ATA Show

Best New Bow Sights for 2019

Tony J. Peterson - January 10, 2019

Check out our picks for the best new bow sights from the 2019 ATA Show!

Going from field tips to broadheads requires arrow tuning on a higher plane.

 Good broadhead flight How-To

4 Steps to Perfect Broadhead Flight

Bowhunting Online Staff

Going from field tips to broadheads requires arrow tuning on a higher plane. Good...

See More Trending Articles

More Bows

After our entire camp tagged out early on a recent pronghorn hunting trip, we spent a sunny day Bows

Gear Review: Muzzy Bowfishing Addict

Emily Kantner - September 04, 2018

After our entire camp tagged out early on a recent pronghorn hunting trip, we spent a sunny day

We got our hands on the brand new 2019 bows from Bowtech. See how the Realm SR6 and the Realm SS performed in our technical tests! Bows

2019 Bowtech Launch: Realm SR6 & SS Review

Jon E. Silks - November 07, 2018

We got our hands on the brand new 2019 bows from Bowtech. See how the Realm SR6 and the Realm...

See how this 2020 carbon rig performed in our technical bow test. Bows

Bow Review: Hoyt REDWRX Carbon RX-4 Alpha

Jon E. Silks - February 14, 2020

See how this 2020 carbon rig performed in our technical bow test.

With a host of new features and technology, the Vertix has generated plenty of buzz. Bows

Bow Review: Mathews Vertix

Jon E. Silks - October 09, 2019

With a host of new features and technology, the Vertix has generated plenty of buzz.

See More Bows

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE

GET THE NEWSLETTER Join the List and Never Miss a Thing.